RK_mini_01
- machine for manufacturing building blocks in the standard brick's size
(Patents RF # 2175699 & # 2240895)
 |
RK_mini_01 is the first in the new line of the machines which bring into effect all advantages of SPSIC technology: high efficiency and quality of manufactured products at rather small weight of the machine, low consumption of energy and simplicity of service. RK_mini_01 is designed to produce building blocks of the size of the standard brick. For manufacture of blocks various raw materials (including ground) can be used. RK_mini_01 operating conditions: Special features: Possibility to use excavated ground as raw material at the construction site. Specifications: Unit dimensions: |
RK 250
Zoned pumping unit to make building blocks
(Patents RF # 2085400 & # 2147516)
The Gold medal of the Third Moscow International Fair of Innovations and Investments (2003)
RК 250 is designed to produce building blocks (solid, hollow and shaped), foundation blocks and facing tiles from local materials, including ground.
RK-250
RK 250 operating conditions:
All year round in heated premises.
Seasonal (warm seasons) - at the construction site.
Special features:
No need for a foundation.
Easy maintenance.
No need for intensive training: one can learn to operate RK 250 in couple of hours.
Possibility to use excavated ground as raw material at the construction site.
Specications:
Output - 250 blocks per hour (1.7 cub.m/hr)
Block dimensions - 390x190x90 mm
Modes of operation:
Automatic
Semi-automatic
RK250 products (standard equipment).
Capacity:
Installed – 6,2 kW
Consumed – less than 4 kW
Voltage: 380 V, 50 Hz
Unit dimensions:
Length – 2210 mm
Width – 1820 mm
Height – 1580 mm
Weight – 1700 kg
The presentation of RK 250 at Miyazaki, Japan
Compression strength:
non-stabilized (ground) - from 3.0 MPa (30 kgf/sq.cm);
stabilized (soil cement, with addition of cement from 5 per cent wt) - from 6.0 MPa (60 kgf/sq.cm).
«A Shop on Your Desk» - the MN 05 molding (extruding) machine
(Patent RF # 2163188)
The Silver medal of the Second Moscow International Fair of Innovations and Investments (2002)
MN 05 opens a new era in production of various construction materials at the site and at home.
MN 05 provides unlimited creative possibilities for professionals and amateurs in construction, repair and restoration of buildings and structures.
MN 05 can produce a wide spectre of construction items:
bricks and blocks (plain and shaped),
tiles for sidewalks and facing tiles,
curbstones and cobblestones,
poles and pillars, props and chutes,
drainage pipes, etc.
Specification:
Molded strip width - 250 mm
Molded strip thickness - 20-66 mm
Molding speed, design - 0,3-0,5 m/min
Drive - electric hand drill with power rating of 600 W and above, voltage 230 V, 50 Hz
Assembled unit dimension: 1,040 x 386 x 712 mm
Unit’s weight - 52 kg
MN 05, although being a hand tool, provides better quality of the product than that produced at standard industrial units.
The results of the test carried out at the Building materials and production of construction test centre TSNIIS-TEST show that the items molded at the MN 05 using fine concrete mixture had the density of not lower than 2,300 kg/cub.m., compression strength of 45 MPa (450 kgf/sq.cm) and above, and bending strength starting from 10 MPa (100 kgf/sq.cm). They were graded as F1000 and above by cold resistance for construction concrete, F300 and above by cold resistance for road concrete, and W4 and above by waterproof properties.
These machines are manufactured under official license from the authors of the technology.
If you have any questions, please direct them to the authors of the technology by:
Telephone: + 7 (926) 521.3027,
E-mail:
Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript
,
Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript
